新闻资讯

NEWS CENTER

  • 天然气干燥机的正确安装方法
  • 本站编辑:杭州力诺机械设备有限公司浏览次数:

  干燥机是空压机后处理设备的关键,从空压机出来的压缩空气由于含有大量的饱和水分,需要用到干燥机进行净化干燥处理,以获得高品质的压缩空气来满足生产工艺对气体品质的要求。那么正确的安装方法是怎样的呢?   

   1、干燥机与周围环境或机器之间的距离,应保持在一米以上,以利操作维护保养。

   2、当多台干燥机并联安装在同一室时,以避免热导、负压影等响冷干机换热性能的情况。

   3、请对避免安置于屋外直接日晒和雨淋或温度高、通风不良以及尘埃多的场所。

   4、干燥机出入口上方请加装旁通阀以利检修,安装时应尽量避免管道太长,弯曲角度太多,管径太小,以避免压力降低。

   安装干燥机的好坏,会影响进气温度、进气压力、流量、含水量等等,这些都将直接影响压缩空气的品质。所以我们在安装时应该规范,才能保证获得合格的成品气,提高干燥机的运行效率。

The dryer is the key of the air compressor post-processing equipment. The compressed air from the air compressor contains a lot of saturated water, so it needs to be purified and dried by the dryer to obtain high-quality compressed air to meet the requirements of the production process for gas quality. So what is the correct installation method?

1. The distance between the dryer and the surrounding environment or the machine should be kept at more than one meter to facilitate operation and maintenance.

2. When multiple dryers are installed in parallel in the same room, to avoid the heat conduction, negative pressure shadow and other effects on the heat exchange performance of the cold and dry machine.

3, please avoid placing in the outdoor direct sunlight and rain or high temperature, poor ventilation and dust.

4. Please install a bypass valve above the inlet and outlet of the dryer to facilitate maintenance. During installation, the pipe should be avoided as far as possible to avoid too long, too much bending Angle and too small pipe diameter to avoid pressure reduction.

The installation of the dryer will affect the intake temperature, intake pressure, flow, water content and so on, which will directly affect the quality of compressed air. Therefore, we should standardize the installation in order to ensure qualified finished gas and improve the operation efficiency of the dryer.