新闻资讯

NEWS CENTER

  • 吸干机氧化铝的使用寿命?
  • 本站编辑:杭州力诺机械设备有限公司浏览次数:

对于吸附式干燥机中的氧化铝要多久更换一次的问题,有的说吸附式干燥机如果氧化铝的质量好的话,可以两年换一次,但有的不是这样认为的。

For the problem of how often the alumina in the adsorption dryer needs to be replaced, some say that the adsorption dryer can be replaced once every two years if the alumina quality is good, but some don't think so.

无热再生吸附式干燥机可以轻易的将水分子吸附在分子筛颗粒内,再利用再生方法来还原分子筛,其压缩空气点将可轻易达到-40可靠的控制系统:可在现场调节,10分钟周期(产生-40℃露点进气口温度38℃)或4分钟周期(产生-70℃露点,进气口温度38℃)。

The heatless regenerative adsorption dryer can easily adsorb water molecules in the molecular sieve particles, and then use the regeneration method to restore the molecular sieve. Its compressed air point can easily reach - 40. Reliable control system: it can be adjusted on site, 10 minute cycle (generating - 40 ℃ dew point, inlet temperature 38 ℃) or 4 minute cycle (generating - 70 ℃ dew point, inlet temperature 38 ℃).

久经耐用的气流控制阀具有比较大的可靠性,采用先进的电磁切断阀。

The durable air flow control valve has the greatest reliability and adopts advanced electromagnetic shut-off valve.

无热再生的吸附式干燥机的氧化铝填装量跟设备的大小有很大的关系,如果是大流量的空压机那么议案干燥机就会比较大,还有一种比较大的分子筛填装量也是比较大的。

The alumina filling capacity of the adsorption dryer without heat regeneration is closely related to the size of the equipment. If it is a large flow air compressor, the motion dryer will be relatively large, and the filling capacity of a relatively large molecular sieve is also relatively large.

而一般氧化铝分子筛都有一个使用寿命,那就是如果填装量大的话,那可能更换的时间久会长一点,但是比较好的还是配套相应对的吸附式干燥机。

The general alumina molecular sieve has a service life, that is, if the filling amount is large, it may take a long time to replace, but the best thing is to match the corresponding adsorption dryer.