新闻资讯

NEWS CENTER

  • 冷干机的原理,再也不用求别人教了
  • 本站编辑:杭州力诺机械设备有限公司

常用冷干机按冷凝器的冷却方式分有风冷型、水冷型两种;按进气温度高低分有高温进气型(80℃以下)和常温进气型(40℃左右);按工作压力分有普通型(0.3—1.0MPa)和中、高压型(1.2MPa以上)。

工作原理与流程

冷冻式压缩空气干燥机通过冷却降温,使压缩空气中的水蒸汽凝结成液滴,从而达到减少含湿量的目的。凝结出的液滴经过自动排水系统排出干燥机。只要干燥机出口的下游管路所处的环境温度不低于蒸发器出口露点温度,就不会产生二次结露现象。

Common cold and dry machine by cooling condenser with air-cooled, water-cooled type 2; according to the intake temperature is high temperature air inlet type (80 DEG C) at ambient temperature and inlet type (40 DEG C); according to the working pressure points common type (0.3 - 1.0MPa) and high (1.2MPa to).
Working principle and process
The freezing type compressed air dryer can condense the water vapor in the compressed air into liquid drops by cooling and lowering the temperature, so as to reduce the moisture content. The condensed droplets are discharged from the dryer through an automatic drainage system. As long as the ambient temperature of the downstream pipe of the dryer outlet is not lower than the dew point temperature at the evaporator outlet, there will not be a two condensation phenomenon.

压缩空气系统

干燥机的目的是干燥高压气,把压力为30-32bar温度为30℃-50℃的高压气的温度降到1-6℃,过滤出其中的水分,供吹瓶机使用。

冷媒系统

利用冷媒的低沸点特性,在热交换时从液态变成气态吸收压缩空气的温度,从而降低压缩空气的温度。